What is the OSHA Card
OSHA (Occupational Safety and Health Administration) is the federal agency responsible for workplace safety and health. It runs the Outreach Training Program, which offers voluntary training on recognizing and avoiding workplace hazards. Those who complete the entire course receive a course completion card (student course completion card), commonly referred to as the "OSHA card."
Several things are often confused:
- The OSHA card is proof of training completion, not a certification or professional license.
- Courses are conducted by independent trainers authorized by OSHA (authorized trainers), not OSHA employees. They set their own schedules and prices.
- The Outreach training does not replace training that employers must provide according to specific OSHA standards, such as scaffolding or fall protection.
- Federally, the course is voluntary. However, some states, cities, employers, and unions require it.
Types of Courses
- Construction: 10 or 30 hours.
- General Industry: 10 or 30 hours (including manufacturing, warehouses, healthcare).
- Maritime: 10 or 30 hours (ports, shipyards).
- Disaster Site Worker: 15 hours (work on disaster recovery).
Poles working in the USA most often take the OSHA 10-Hour Construction.
10 or 30 Hours
According to OSHA, the 10-hour course provides workers with basic knowledge of common hazards. The 30-hour course is intended for those supervising work or having safety responsibilities, such as foremen, superintendents, or construction managers. There is no employment requirement to take the course, and there is no minimum age limit.
Choosing an OSHA Course
The flowchart suggests which course to start with; always check what your employer, union, or state regulations require.
Which OSHA Course Do I Need?
What industry do you work in?
What is your role on the construction site?
Do you work on construction sites in New York City (NYC)?
OSHA 10-Hour Construction
A basic course for construction workers. Some states require it on public projects, and Nevada requires it from all construction workers. See the section "Where the OSHA Card is Required."
OSHA 30-Hour Construction
A course for supervisors. In Nevada, supervisors must have the OSHA-30 card within 15 days of employment. In NYC, the 30-hour course counts towards the SST card.
You Need an SST Card
On many construction sites in NYC, the OSHA 10 card alone is not sufficient. A Site Safety Training card (40 hours for workers) is required, and OSHA 10 counts as 10 hours towards it.
OSHA 10 or 30-Hour General Industry
The 10-hour version for workers, 30-hour for supervisors or those responsible for safety.
OSHA 10 or 30-Hour Maritime
Courses for ports and shipyards, 10 hours for workers and 30 hours for supervisors.
Disaster Site Worker (15 hours)
A separate course for those working on disaster recovery and emergency response.
OSHA 10-Hour Construction: What It Covers
The course must last at least 10 hours of instruction. The program is set by OSHA:
- Mandatory Part (6 hours):
- Introduction to OSHA (1 hour): employee rights, employer responsibilities, how to file a complaint.
- Focus Four, the four leading causes of fatal accidents on construction sites (4 hours): falls (at least 1.5 hours, as this is the most common cause of death), electrocution, being struck by an object or vehicle, caught-in or -between (e.g., in a trench).
- Personal protective equipment (30 minutes).
- Health hazards on construction sites (30 minutes), e.g., noise, silica dust.
- Elective Topics (2 hours, at least two), including excavations, scaffolding, stairs and ladders, cranes, hand and power tools, welding, confined spaces, fire protection, material storage.
- Optional Part (2 hours): other hazards or expansion of previous topics.
OSHA 30-Hour Construction: What It Covers
The course lasts at least 30 hours and emphasizes hazard recognition and prevention.
- Mandatory Part (14 hours): introduction to OSHA (1 hour), safety management on construction sites (2 hours), Focus Four (6 hours), personal protective equipment (2 hours), health hazards (2 hours), stairs and ladders (1 hour).
- Elective Topics (12 hours, at least six): including concrete and masonry, confined spaces, cranes and lifts, excavations, fire protection, scaffolding, steel erection, tools, welding, and Foundations for Safety Leadership (at least 2.5 hours).
- Optional Part (4 hours).
How the Course Works
OSHA Rules for Trainer-Led Classes
- Maximum of 7.5 hours of instruction per day, so the 10-hour course lasts at least 2 days, and the 30-hour course lasts at least 4 days.
- The course can be spread over weeks or months, but it must be completed within 180 days from the start.
- Classes can be held in-person or live via videoconference (with camera and audio on at all times).
- OSHA does not require an exam. The trainer may conduct a test, and they decide whether the participant has completed the course. Test time does not count towards course hours.
Online Course
Online self-paced courses (without a live instructor) can only be offered by OSHA-authorized providers (OSHA-Authorized Online Outreach Training Providers). OSHA publishes this list separately for 10 and 30-hour courses in construction and general industry. Courses from providers not on the OSHA list are not guaranteed. Each provider sets their own prices, so it's worth comparing several offers from the list.
Language of Instruction
According to program rules, the trainer must conduct classes in a language understandable to participants or use a translator familiar with safety topics. In consecutive translation, the course must last at least twice as long. If you are looking for a course in Polish, ask trainers, local unions, vocational schools, and employer organizations in your area.
Course Completion Card
- The trainer must issue the card directly to the participant within 90 days of course completion, regardless of who paid for the training.
- If you do not have the card after 90 days, contact the trainer or online provider. If that does not help, write to OSHA at outreach@dol.gov.
- The trainer may also issue a certificate, but is not required to do so. Whether a certificate is sufficient instead of a card is determined by the employer or construction site.
- The plastic card has a QR code that can be used to verify training at the OSHA Training Institute that issued the card.
Validity and Duplicate
- Construction, General Industry, Maritime, and Disaster Site cards do not have an expiration date at the federal level.
- However, employers, unions, or state or local regulations may require training from recent years (examples below).
- A duplicate is issued only by the trainer or provider where you took the course, and only if the course was within the last 5 years. One duplicate is allowed per course. OSHA does not maintain a participant registry and cannot recreate the card.
Where the OSHA Card is Required
OSHA does not require the course, but some states and cities do. Below are the regulations we checked in official sources:
| State / City | Who It Applies To | Requirement |
|---|---|---|
| New York (State), Labor Law § 220-h | Workers on public construction projects with contracts over $250,000 | At least a 10-hour OSHA-approved course before starting work |
| New York (City), Local Law 196 | Construction requiring a Site Safety Plan and designated superintendent, coordinator, or safety manager | SST card: 40 hours for workers, 62 hours for supervisors (details below) |
| Connecticut, Gen. Stat. § 31-53b | Workers on public projects: new construction over $1 million, renovation over $100,000 | At least a 10-hour OSHA-approved course; plumbers and electricians with a course older than 5 years need a 4-hour refresher |
| Massachusetts, c. 30 § 39S | Workers on public construction projects over $10,000 | At least a 10-hour course completed before starting work; without documentation, removal from the site is at risk |
| Nevada, NRS 618.983 | All construction workers | OSHA-10 card within 15 days of employment, supervisors need OSHA-30 card |
| New Hampshire, RSA 277:5-a | Workers on public projects over $100,000 or state-funded | OSHA 10 before starting work; without proof within 15 days, removal from the site is at risk |
| Rhode Island, Gen. Laws § 37-23-1 | Workers on state and municipal construction projects over $100,000 | OSHA 10; the card must be carried while working |
| Missouri, RSMo 292.675 | Workers on public construction projects | OSHA 10 within 60 days of starting work on the project |
In Nevada, similar obligations also apply to the entertainment industry, and cards expire after 5 years. Check the regulations of other states and cities, as well as requirements on federal construction sites with your employer or state labor office. We describe union requirements in the guide Union jobs in the USA.
SST Card in New York
- A worker needs at least 40 hours of training specified by the Department of Buildings (DOB). The OSHA 10 course counts as 10 hours, and OSHA 30 counts as 30 hours.
- A supervising person (e.g., superintendent, safety coordinator, competent person) needs 62 hours; OSHA 30 counts as 30.
- Only OSHA training from the last 5 years counts towards the SST card.
- Those with OSHA 10 or 30 from the last 5 years can receive a temporary SST card valid for 6 months and complete training during that time.
- The SST card is valid for 5 years. It is renewed with a refresher course.
- Note: In September 2026, one training company in NYC was accused of issuing fake SST cards. DOB is invalidating its certificates, and affected workers have until December 7, 2026, to complete training with a registered provider. Details are on the DOB website.
How to Avoid Being Scammed
Fake cards and unauthorized "trainers" are a real problem. OSHA advises:
- Before enrolling, ask the trainer to show their current Authorized Trainer card. It should include their name, expiration date of authorization, and the organization that authorized them (usually the OSHA Training Institute). Authorization must be renewed every 4 years.
- Purchase online courses only from providers on the OSHA list.
- Check if the trainer is on the OSHA warning list (Outreach Trainer Watch List).
- OSHA does not maintain or recognize any nationwide site for card verification. Any site claiming to do so is not official.
- Be wary of offers like "card on the spot without a course." A card is only given to those who complete the entire course and all required topics.
- Report fraud to outreach@dol.gov or call 847-725-7804. Provide the trainer's name, date, location, and type of course.
What to Do After Getting the OSHA Card
The 10 or 30-hour course is an introduction. Additional training is required for specific jobs as mandated by OSHA standards, such as scaffolding, excavations, forklifts, confined spaces, or working with hazardous materials. OSHA has compiled these in publication 2254 "Training Requirements in OSHA Standards."
A separate requirement applies to renovations of older homes. According to EPA regulations (Renovation, Repair and Painting), anyone paid for work disturbing painted surfaces in homes, daycare centers, and schools built before 1978 must have the appropriate company certification and trained workers.
For information on working in construction, licenses, and rates, see our guide Working in Construction in the USA.
Practical Tips
- Before paying, ask your employer or union if they cover the cost of the course or organize it themselves.
- If you work in NYC, plan for the entire SST card right away, not just OSHA 10.
- Keep a copy of the certificate and a photo of the card on your phone. A duplicate is only available for 5 years after the course.
- Record the trainer's name and contact information. Without this, it is difficult to verify training, as OSHA does not maintain a registry.
- If your English is limited, look for a course with a trainer who speaks Polish or with a translator.
Frequently Asked Questions
Does the OSHA 10 card expire?
Federally, it does not. Construction, General Industry, Maritime, and Disaster Site cards do not have an expiration date. However, some local regulations and employers require training from the last 5 years, e.g., the SST card in NYC.
Is the online course as valid as the in-person one?
Yes, if you take it from a provider on the OSHA list. The card looks the same. A course from a provider not on the list may not be recognized.
I lost my card. What now?
Contact the trainer or online provider where you took the course. A duplicate is only possible within 5 years of the course and only once.
Do I have to pass an exam?
OSHA does not require an exam. However, many trainers and online providers conduct their own tests, and they decide on course completion.
Sources
As of October 23, 2026. This guide is informational and does not constitute legal advice. State, local, and employer requirements may change. Before starting work, check the current rules with your employer, union, or state labor office.
Comments (0)
No comments yet. Be the first!